HRANIPUR SPEED – NATURAL
Parameters
| Producer Product Designation | C000152 - 850PURSPXXX0310 |
|---|
Product description
Hranipur SPEED is one-component polyurethane adhesive. It is specially developed for installation of wooden structures, however, it is also suitable for other assembly work, especially where a strong, waterproof and permanent joint between two materials is required. It is not suitable for bonding polyethylene, polypropylene, nylon, ABS and PTFE.
Low humidity values increase the setting time; on the contrary, high humidity reduces it.
USAGE / EXAMPLE OF USAGE
- gluing wood
- gluing stair treads
- gluing wooden handrails to railings
- gluing floor rails
- gluing window sills
- gluing assembly and repair work
TECHNICAL DATA & SUITABLE WORKING CONDITIONS
Parameter | Value |
Appearance | Thixotropic paste |
Colour | Natural |
Viscosity (Brookfield 23°) | 420 000 ± 100 000 mPas |
Density | approx.. 1,38 g/cm2 |
Application temperature | from +5 to +35°C |
Open time at 23°C | 30 sec |
Thermal resistance of the joint after hardening | from -30 to +100°C |
Application time | max 1 min* |
Close assembly time | max 2 min* |
Pressing time | 5 – 10 min* |
Consumption | 400g/m2 |
* Time at 50% relative humidity and 20 ° C, lower temperatures and humidity prolong the time and vice versa
APPLICATION / HANDLING
Materials must be clean, dry and dust and grease-free before application. Weak wetting of the surface ensures greater adhesion and faster reaction of the adhesive. Apply at a temperature of + 5 to + 35° C. Apply the Hranipur SPEED to one glued surface using a hand or pneumatic gun to the sealant. After coating, press the materials together for 5-10 minutes until the adhesive hardens.Low humidity values increase the setting time; on the contrary, high humidity reduces it.
