HRANICON Contact Adhesive 50

HRANICON - Contact Adhesive 50

HRANICON Contact Adhesive 50



Universal chloroprene adhesive without toluene for surface gluing. It has excellent adhesion to most building surfaces. Water and aging resistance. Designed for professional use.

Examples of use:

  • bonding of natural and artificial leather
  • gluing of textiles, upholstery textiles felt
  • gluing car floors and cork
  • bonding of HPL / CPL laminates to chipboard and MDF boards
  • gluing foam
  • gluing rubber, and veneer

Characteristics:

Hranicon 50 glue is red. It excels in strong initial tack and high final strength. The glue is flammable. We do not recommend Hranicon 50 for bonding PP, PE, rigid PVC, expanded polystyrene, and other solvent-sensitive surfaces.

Dry matter content 16 %
Viscosity 350 mPas
Density 0.83 ± 0.02 g / ml
Ventilation time 3–10 min
The final fortress 3 days
Combustibility +  
Temperature resistance -30 to +110 ° C

Packing and storage:

Store in the original closed package at a temperature of 5 to 25 ° C in a dry place protected from frost and excessive heat. Shelf life is 12 months from the date of manufacture, provided proper storage.

Application:

First prepare smooth surfaces (rubber, leather) for gluing with sandpaper. Remove any dust. The surface of the material must always be uniform, level, dry, free of dust, scratches, cracks, free of dirt, and substances that prevent adhesion.

We recommend performing an adhesion test before application. After the test, mix the adhesive and apply to both surfaces using a spray gun with a nozzle with a diameter of 1.4 to 2.0 mm and a pressure of 4 to 6 bar. Join the two surfaces and press them together. If necessary, you can repair the glued materials within a few minutes. After application, let the adhesive dry for about 3 to 10 minutes, the time depends on the ambient conditions and the properties of the surface. The joint reaches full strength in 3 days from the time of gluing.

Apply at a temperature of 16 to 25 ° C.

Before curing, you can clean the surface with acetone or the universal cleaner Hraniclean 01. After curing, clean only mechanically.